PROMIG 500XP Heavy Industrial High Speed Pulse MIG Welder,China high speed pulse mig Supplier & Manufacturer

DETAILS

High Speed Pulse MIG Welding

PROMIG 500XP

Synergy Control

Improved Operation Process & Controls

High Speed Pulse (HSP)

High-Speed Double Pulse (HDP)

High-Speed Spray Arc (HSA)

Micro Double Process (MDP)

Ultra Low Spatter (ULS)

Hybrid Pulse Control (HPC)

High Speed Spot (HSS)

Simple Operation

3 Steps to achieve weld perfection

1. Select operation mode

2. Select Job-list No.

3. Adjust welding current

(always the perfect setting by the synergic function using the material thickness)

Synergy Control With Job-list

The Job-lists display is easily and intuitively controlled through its graphical user interface.We assembled the perfect welding curve in every Job-No. for highly efficient multi-process welding of carbon steels and stainless steel and aluminum alloys. Operation is easier than ever before.

Separated wire feeder & remote control, robotic ready (as optional)

Robotic with advanced MIG process package, achieve ultra-high efficient welding with perfect welding performance. Optional package for robot interface by Analog connectors or Digital ports including EtherNetlP, DeviceNet, CAN, CANOPEN, RJ485 etc.

Pulse MIG with larger current difference

The PROMIG 360XP is an upgraded module and machine that is compatible with more advanced pulse processes. The PROMIG 360XP improves on the standard pulsing process to provide a higher peak current and a larger current difference that is more suitable for aluminum alloy welding. As wire speed increases/decreases, the pulse or MIG parameters also increase/ decrease to match the right amount of power needed to achieve a more perfect welding curve.

Double Pulse MIG

The double pulse is a combination of the Pulse MIG process and the variation of the high and low currents, with the low pulse section providing cooling time to the melt pool while simulating the oscillation so that the melt pool oscillates. So no need to swing, You can easily get a cosmetically pleasing weld seam, with significantly lower and more controller heat input into the workpiece. It results in much lower distortion and less rework for Aluminum sheets.

By Double Pulse process, the heat input of arc is alternating, effectively reducing the heat input of base metal. It reduces the occurrence of welding defects such as crack. Welding quality is comparable to TIG process.

HSP - High Speed Pulse Technology

-Specifically designed for demanding workshop use, the deposition rate can increase 25~48 % for various materials, whether used in manufacturing thick materials or sheet metal.

-The High-Speed Pulse(HSP) process enables you to save time, money, and energy compared to traditional pulse welding. This process is ready to raise pulse welding to a whole new level!

-In general, One pulse melt one droplet, but we increase the submission of these droplets by TOPWELL’s New High-Speed pulse process.The transition will be faster, narrower HAZ zone and deeper penetration!

Get better welding seam

Less heat input, less spatters, less rework.

Get higher welding strength

Deeper penetration, no undercut defects, higher strength.

HSA - High Speed Spray Arc

The perfect combination of a highly concentrated and extremely stable arc with high density. HSA delivers deeper penetration, narrower heating zone, allows smaller opening angles for multi-layer welding, significantly improves the welding speed up to 30% faster than conventional MIG-MAG welding. It makes welding more efficient and more economical.

Smaller opening angle

Deeper penetration

More material saving

Higher welding efficiency

ULS - Ultra Low Spatters

The ULS process is a modified short-arc transfer arc with perfect waveform setting that greatly reduces spatter generation. In the pinch phrase, there is a special current interruption, the energy is extracted under the program setting, avoiding the explosion caused by the large current, and the surface tension of the molten pool warms the generated droplets. Even in CO2 and MAG welding, it can minimize the spatters, which means less rework, fewer rejects, less cleaning required and savings on wearing parts.

HSS - High Speed Spot Technology

HSS is the high speed spot welding, which is perfectly combining the welding process, arc physics, high dynamic power response and powerful motor control technology, short in arc ignition time and arc ending time, a welding spool can be formed swiftly. A spot welding cycle is quickly completed, cycle over and over, by adjusting the time gap with the robot to get the fish scale you wish, weld seam is clear and beautiful.

HPC - Hybrid Pulse Control

The key is synergetic waveform controlled welding process control variants applied in MIG welding which are Pulse(spray arc) and short-circuit transfer types in one duty cycle. It delivers exceptional directional stability, deep penetration and free-spatters.

HPC Vertical-up Welding Process

The secret is the combination of two processes: one is the high energy phase to heat up the material quickly. Topwell's control technology ensures a perfect transition to the rapidly reduced energy phase. It ensures reliable penetration, precisely sized weld filling and a near- optimal throat thickness.Vertical-up welding with Topwell's HPC process is significantly much faster and simpler than classical "X-Mas tree".

MDP - Micro Double Process

MDP is Micro Double Process, ultra-precise on the synergy Pulse wave-form controlled process-control, freely adjust the weld seam chevrons from coarse to fine. The key is that when the high and low pulses alternate, there is no droplet formation in the low pulse phase. The advantage of MDP are precise energy input, low distortion, perfect TIG-like welding appearance easily produced by anyone, and the welding productivity can up to twice as quick as the conventional TIG. MDP is particularly suitable for thin to medium-walled (1-8mm) Aluminum, Steel, and CrNi applications, like frames, tables, beds, and furniture structures.

Improved Operation Process & Controls

Arc Length control

With the arc length control, no matter the changing distance between the torch and the workpiece, or the welding voltage, the arc length is kept constant, and the seam quality and appearance remain unchanged.

Dynamic control

The arc can easily be adjusted depending on the workpiece and positions as well as to the individual preferences of the welder through Dynamic Control. Changing the arc to soft or hard or anywhere in between, increases the reliability for a good root formation and side fusion even with a non-ideal position of the torch.

Improved Operation Process & Controls

HSS is the high speed spot welding, which is perfectly combining the welding process, arc physics, high dynamic power response and powerful motor control technology, short in arc ignition time and arc ending time, a welding spool can be formed swiftly. A spot welding cycle is quickly completed, cycle over and over, by adjusting the time gap with the robot to get the fish scale you wish, weld seam is clear and beautiful.

VIDEO

SPECIFICATIONS

Machines

Product Name	ProMIG-500XP
Machines Processes	SMAW GMAW FCAW GMAW-P GMAW-HSP
Wire Feeder	4-Rollers

Product Weights & Dimensions

Dimensions(LWH)：Machine	950x460x1080 mm
Dimensions(LWH)：Wire feeder	710x350x500 mm
Net Weight : Machine	66.5KG
Net Weight : Wire feeder	15KG

Basic Specification

Mains voltage(V)	3PH~400V±15%（50/60Hz）
Max.Load Power Capacity	25.18KVA
Rated Duty cycle at 40℃(105℉): 60%	500A/39V
Rated Duty cycle at 40℃(105℉): 100%	400A/31.5V
Open Circuit Voltage	70V~80V
Power Factor	0.87
Efficiency	89%
Wire feed unit	4 rollers
Wire feed speed rang	~25m/min
Wire Spool Capacity	300mm(15kg)
Wires φ (mm): Fe	0.8~1.6mm
Wires φ (mm): Alu	1.0~1.6mm
Wires φ (mm): Flux-cored	0.8~1.6mm

YOU MAY ALSO NEED

Push-Pull Gun

Remote Control

Welding Jacket

Preminum welding helmet