SYNERGY MIG

The synergic operation of the machine makes it Veasy to use, even for the beginning welder. Simply set wire type and diameter, then choose a wire speed. Now you’re off to weld! As wire speed increases/decreases, the arc voltage also increases/decreases to maintain a constant welding arc.

PULSE MIG

The Pulsed MIG process works by forming one droplet of molten metal at the end of the electrode per pulse. Then, just the right amount of current is added to push that one droplet across the arc and into the puddle. The transfer of these droplets occurs through the arc, one droplet per pulse.

Advantage:

• Absent or very low levels of spatter.
• More resistant to lack of fusion defects than other modes of GMAW metal transfer.
• Excellent weld bead appearance.
• Reduced levels of heat induced distortion.
• Ability to weld out-of-position.
• Lower hydrogen deposit.
• Reduces the tendency for arc blow.
• Lends itself to robotic and hard automation applications.

double Pulse MIG

Using Waveform Control Technology, the welding machine alternates between high and low energy pulses. This combination of high and low pulses produces the "rippled" bead appearance. The high energy pulses provide a hotter arc (longer arc duration), which improves cleaning action at the base material. The low energy pulses allow the weld puddle to cool, which controls the heat input for good penetration.