Search This Supplers Products:welding machineAc/Dc Tig WelderPulse Mig WelderPlasma CutterMig Welding MachineTig Welding Machine
STEELMATE SL500 is choice of reliability, powerful and easy operation , full control, fewer cables
- group name
- MIG Welders
- Min Order
- 1 piece
- brand name
- TOPWELL
- model
- STEELMATE SL500
- Nearest port for product export
- Shanghai/Ningbo Port
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW
- Acceptable payment methods
- T/T
- Export mode
- Have the independent export and import right
- update time
- Thu, 21 Nov 2024 21:15:28 GMT
Paramtents
Mains voltage(V) 3PH~400V±15%（50/60Hz）
Max.Load Power Capacity 25.18KVA
Output Range 30A/15.5V~500A/39V
Rated Duty cycle at 40℃(105℉): 60% 500A/39V
Packging & Delivery
- 75cm x40cm x72cm
-
Min Order1 piece
Briefing
Experience Full Control in Welding with STEELMATE SL500, Fewer Cables - Perfect for Importers.
Detailed
DETAILS
STEELMATE SL500
Quick Specs
|
Steelmate po Series
|
Steelmate SL500 |
|
Input Voltage
|
3PH ~ 400V ±15% |
|
Rated Output(40℃) 60% |
500A/39V |
Cooling system | Air-cooled |
Equipment
|
Welding process
|
|
|
Solid wires (GMAW)
|
●
|
Flux-cored (FCAW) | ● |
Metal-cored (MCAW) | ● |
Air carbon arc cutting & gouging (CAC-A) | ● |
Stick (SMAW) | ● |
● Standard ○Optional
Advanced features
High welding performance
• High welding performance with solid or flux cored wire;
• Built-in special welding data for metal cored wire, vertical welding of thin plates with small welding feet and beautiful shaping.
Bidirectional high-speed carrier communication technology
• Greatly reduced disconnection breakdown with no control cable;
• Significantly reduced cable weight for over-long-distance working;
• Bidirectional high-speed Carrier communication technology between main power source and wire feeder makes information synchronization, precise welding control.
Dual frequecy carrier control technology
• Adopting 250kHZ dual-frequecy carrier redundancy mode, it has strong anti- interference ability. Carrier frequency can be switched manually or adaptively.
Short circuit protection of carrier line
• With carrier line short circuit protection function: can avoid PCB board damage caused by short circuit between carrier line and bus bar;
• With automatic recovery function: after the short circuit between the carrier line and the base material is removed, the welding power supply can automatically return to normal state and continue working;
• It also has protection functions against the following exceptions:
/ Carrier line and welding cable short circuit;
/ Motor control line short circuit;
/ The control line of solenoid valve short-circuit;
/ The welding torch switchabnormally short-circuit;
/ Collision of carrier line connectors;
/ Abnormal CT damage.
Adapt to harsh working environment
• The PCB board and important parts are specially treated to be anti-corrosion and moisture-proof, suitable for high-temperature, humid and salt-spray environments in shipbuilding and offshore engineering.
First-level energy efficiency more energy-saving
• The efficiency of the welding power sourcereaches 88%, and it has obtained first-leveenergy efficiency certification.
Optional IoT unit
• Full digital communication interface and available for Ethernet, records welding data in real time and monitors the status of the welding;
• Enables data exchange and analysis, remote downloading and changes to welding process specifications;
• Automatically alarm when the welding current and voltage exceed the specifications. Complete welding tasks correctly and reliably.
• Can identify IC card information and realize operator authority management and performance statistics ;
• Both administer and user management are supported.
Upgraded cable connection interface
• Easily switch between MMA/MAG/MIG/Gouge processes with wiring alone, realize multiple welding process requirements in one machine;
• The special cable design supports tracheal carriers communication, reduces bulky cable obstacles, and reduces the failure rate of long-distance welding.
Wiring diagram
1. Torch/Electrode holder
2. Power source
3. Base material
4. Base material cable
5. Intermediate cable kit / Air compressor
6. Wire feeder
7. Gas regulator
8. Gas bottle
Optimized separated wire feeder
• 30% lighter than regular ones;
• Good protection: Equipped with anti-collision side panels, and the top of the remote control is equipped with anti-collision side panels. reinforced design of wire reel shaft to prevent sagging and deformation;
• Can provide powerful wire feeding force and good stability of welding;
• Equipped with a full-featured remote control, which allows all parameters to be set at hand, making operation more convenient and fast.
Full function remote control
• Full-function settings, from gas regulation to wire feed speed regulation, are not limited to simple current and voltage settings;
• The JOB function can be called directly on the remote control, which is more collaborative;
• Can lock the panel to prevent accidental touch;
• The remote control can be quickly disassembled, so can take it anytime, anywhere to adjust the control.
Long distancewelding work
Ultra-Long cable loop compensation function
Intelligent compensation makes welding more stable, especially suitable for oversized workpiece welding occasions.
SPECIFICATIONS
|
Product Name
|
STEELMATE SL500 |
|
Mains voltage(V) |
3PH~400V±15%（50/60Hz） |
|
Max.Load Power Capacity |
25.18KVA |
Output Range | MIG: 30A/15.5V~500A/39V |
Rated Duty cycle at 40℃(105℉): 100% | MIG: 500A/39V |
Open Circuit Voltage | 70V~80V |
Power Factor | 0.87 |
Efficiency | 89% |
Wire feed unit | 4 rollers |
Wire feed speed range | 0~25m/min |
Wire SpoolCapacity | 300mm(15~20kg) |
Wires φ (mm): Fe | 0.8~1.6mm |
Alu | 1.0~1.2mm |
Flux-cored | 1.0~1.6mm |
Dimension (L x W x H): Machine | 655 x 300 x 620 mm |
Wire feeder | 500 x 210 x 400 mm |
Net Weight : Machine | 50kg |
Wire feeder | 12kg |
YOU MAY ALSO NEED
Water Cooler
Remote Control
Welding Jacket
Preminum welding helmet